Türkçe
English
232 جودة مواصفات الورقة
Low carbon steels for cold forming
البدائللا يوجد بديل لهذه الورقة.
Flat / Cold Rolled
Cold rolled coils or flat steel products are produced by rolling hot rolled flat steels without a heat treatment operation in a thickness range of 0.20 to 2.00mm. While the product’s physical properties are all homogeneous along the strip, surface flatness, width and thickness values have fulfilled expectations at the top level.
Low carbon steels for cold forming
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||
| WSS-M1A365 | A12 | 232 | 0.10 | 0.50 | 0.025 | 0.02 | 0.50 | 0.01 | 0.30 | 0.20 |
- There are no chemical footnotes.
الخواص الميكانيكية
| المعيار المكافئ | رقم جودة إرديمير | Re [N/mm2] | Rm [N/mm2] | A(%) min. | r90 | |
|---|---|---|---|---|---|---|
| المعيار | جودة | |||||
| A80 | ||||||
| WSS-M1A365 | A12 | 232 | 140-240 | 270-370 | 34 | 1.3 min. |
- The transverse and longitudinal test values are the same. Then tensile test is performed only transverse and shown on the certificate. It is also guaranteed longitudinal test values.
- The values of r90 only apply to products of thickness d ≥ 0.5 mm.