4950 جودةمواصفات الورقة

4950 جودة مواصفات الورقة

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

رموز الحروف القابلة لإعادة الإنتاج --> HRUKK --> KRKK --> LRKK --> RKK

البدائل3995 4044 4244 4932 4936 4942 4946 5620 6044 6050 6052 6252 9355 9356 811

Flat / Hot Rolled

Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

التركيب الكيميائي (%)

المعيار المكافئ		رقم جودة إرديمير	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Vmax.	Nbmax.	Timax.
المعيار	جودة	رقم جودة إرديمير	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Vmax.	Nbmax.	Timax.
EN 10149-2:2013	S500MC	4950	0.12	1.70	0.025	0.015	0.50	0.015	0.20	0.09	0.15

(Nb + V + Ti) ≤ 0.22%
The products are supplied in "thermomechanically rolled" condition

الخواص الميكانيكية

المعيار المكافئ		رقم جودة إرديمير	Re [N/mm2]	Rm [N/mm2]	A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness
المعيار	جودة				A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness
المعيار	جودة				A801.8≤t≤2.99	A53≤t≤22	Temperature ( ° C)6≤t≤7.49	KVC J min.6≤t≤7.49	Temperature ( ° C)7.5≤t≤9.99	KVC J min.7.5≤t≤9.99	Temperature ( ° C)10≤t≤22	KVC J min.10≤t≤22	180°
EN 10149-2:2013	S500MC	4950	500 min.	550-700	12	14	-20	20	-20	30	-20	40	Ø 1d

Tensile test values apply to "longitudinal" test pieces
The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.