Türkçe
English
3031 جودة مواصفات الورقة
Hot Rolled Carbon Steel For Strap Production After Cold Rolling And Heat Treatment
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot Rolled Carbon Steel For Strap Production After Cold Rolling And Heat Treatment
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | Almin. | Almax. | Nmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | ||||||||||||
| EN 10083-2:2006 | 28Mn6 | 3031 | 0.25 | 0.32 | 1.30 | 1.60 | 0.03 | 0.02 | 0.25 | 0.40 | 0.02 | 0.08 | 100.00 |
- (Cr + Mo + Ni)% should be maximum 0.63%.
- Specified limit values are determined within the framework of agreements with customers.
- Mechanical test is not carried out.