Türkçe
English
3022 جودة مواصفات الورقة
İnşaat Makineleri İmalatı, İş Makineleri İmalatı, Genel Konstrüksiyon Levhaları, Muhtelif Makine Parçası İmalatı, Kara ve Demiryolu Araçları İmalatı için
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
İnşaat Makineleri İmalatı, İş Makineleri İmalatı, Genel Konstrüksiyon Levhaları, Muhtelif Makine Parçası İmalatı, Kara ve Demiryolu Araçları İmalatı için
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | Nmax. | Crmax. | Momax. | Nimax. | Vmax. | Nbmax. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||||||||||
| SAE J403-2014 | 1022 (MOD) | 3022 | 0.20 | 0.28 | 0.60 | 0.80 | 0.025 | 0.01 | 0.20 | 0.35 | 0.015 | 0.30 | 0.10 | 0.40 | 0.12 | 0.04 | 0.03 | 0.25 |
- Grade specified on the table, is produced within the framework of agreements with customers.
- %Al +0,5(%Ti)+0,5(%V)+0,25(%Nb) ≥ 0,020%
- Mechanical test is not carried out.
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | Nmax. | Crmax. | Momax. | Nimax. | Vmax. | Nbmax. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||||||||||
| KB02 | C22 | 3022 | 0.20 | 0.28 | 0.60 | 0.80 | 0.025 | 0.01 | 0.20 | 0.35 | 0.015 | 0.30 | 0.10 | 0.40 | 0.12 | 0.04 | 0.03 | 0.25 |
- Grade specified on the table, is produced within the framework of agreements with customers.
- %Al +0,5(%Ti)+0,5(%V)+0,25(%Nb) ≥ 0,020%
- Mechanical test is not carried out.