Türkçe
English
5631 جودة مواصفات الورقة
Hot rolled boron alloyed steels for manufacturing of agricultural equipment by quenching and tempering
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled boron alloyed steels for manufacturing of agricultural equipment by quenching and tempering
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Crmin. | Crmax. | Timin. | Timax. | Camin. | Camax. | Bmin. | Bmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | ||||||||||||||||
| EN 10083-3:2006 | 30MnB5 (MOD1) | 5631 | 0.27 | 0.33 | 1.15 | 1.45 | 0.025 | 0.035 | 0.40 | 0.20 | 0.60 | 0.015 | 0.06 | 0.002 | 0.006 | 8.00 | 50.00 |
- Mechanical test is not carried out.
- Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.
- Cr and Ti added according to customer requests.
Flat / Plate
Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.
Hot rolled boron alloyed steels for manufacturing of agricultural equipment by quenching and tempering
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Crmin. | Crmax. | Timin. | Timax. | Camin. | Camax. | Bmin. | Bmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | ||||||||||||||||
| EN 10083-3:2006 | 30MnB5 (MOD1) | 5631 | 0.27 | 0.33 | 1.15 | 1.45 | 0.025 | 0.035 | 0.40 | 0.20 | 0.60 | 0.015 | 0.06 | 0.002 | 0.006 | 8.00 | 50.00 |
- Mechanical test is not carried out.
- Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.
- Cr and Ti added according to customer requests.