Türkçe
English
6007 جودة مواصفات الورقة
Low-carbon unalloyed mild steels for cold reducing with the obligation of batch annealing
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Low-carbon unalloyed mild steels for cold reducing with the obligation of batch annealing
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almax. | Nmax. | |
|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | ||||||||
| SAE J403-2014 | 1006 (MOD) | 6007 | 0.08 | 0.45 | 0.03 | 0.035 | 0.13 | 0.01 | 70.00 |
- Cu + Ni + Cr ≤ 0.16 %
- Specified limit values of N and Al are determined within the framework of agreements with customers.
- Mechanical test is not carried out.
- The limitation requests for the residual elements (Cu, Ni, Cr, Mo) which are not mentioned on the table are subjected to negotitation for special application purposes.
- Suitable for batch annealing after cold reducing.