Türkçe
English
9960 جودة مواصفات الورقة
Low and intermediate strength, atmospheric corrosion resistant structural steels
رموز الحروف القابلة لإعادة الإنتاج --> HRP --> HRPKK --> HRU --> HRUKK --> KRKK --> L --> LKK --> LP --> LPKK --> LR --> LRKK --> RD --> RKK --> RP --> RPD --> RPKK
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Low and intermediate strength, atmospheric corrosion resistant structural steels
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmax. | Mnmax. | Pmin. | Pmax. | Smax. | Simin. | Simax. | Crmin. | Crmax. | Nimax. | Cumax. | Cumin. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||||||
| JIS G 3125:2021 | SPA-H | 9960 | 0.12 | 0.60 | 0.07 | 0.15 | 0.035 | 0.20 | 0.75 | 0.30 | 1.25 | 0.65 | 0.55 | 0.25 |
- Manganese upper limit may be set at 1.00 % or less by agreement between the purchaser and the supplier.
الخواص الميكانيكية
| المعيار المكافئ | رقم جودة إرديمير | Re [N/mm2] | Rm [N/mm2] | A(%) min. t(thickness, mm) | Bend (Longitudinal , BMD) t: thickness | |||
|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||
| A502≤t≤6 | A2006.01≤t≤16 | 180°2≤t≤6 | 180°6.01≤t≤16 | |||||
| JIS G 3125:2021 | SPA-H | 9960 | 355 min. | 490 min. | 22 | 15 | R 0,5d | R 1,5d |
- Tensile test values apply to "longitudinal" test pieces
Flat / Plate
Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.
Low and intermediate strength, atmospheric corrosion resistant structural steels
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmax. | Mnmax. | Pmin. | Pmax. | Smax. | Simin. | Simax. | Crmin. | Crmax. | Nimax. | Cumax. | Cumin. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||||||
| JIS G 3125:2021 | SPA-H | 9960 | 0.12 | 0.60 | 0.07 | 0.15 | 0.035 | 0.20 | 0.75 | 0.30 | 1.25 | 0.65 | 0.55 | 0.25 |
- Manganese upper limit may be set at 1.00 % or less by agreement between the purchaser and the supplier.
الخواص الميكانيكية
| المعيار المكافئ | رقم جودة إرديمير | Re [N/mm2] | Rm [N/mm2] | A(%) min. t(thickness, mm) | Bend (Longitudinal , BMD) t: thickness | |||
|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||
| A506≤t≤6 | A2006.01≤t≤16 | 180°6≤t≤6 | 180°6.01≤t≤16 | |||||
| JIS G 3125:2021 | SPA-H | 9960 | 355 min. | 490 min. | 22 | 15 | R 0,5d | R 1,5d |
- Tensile test values are measured in the longitudinal direction