3022 QualitySheet Specification

3022 Quality Sheet Specification

İnşaat Makineleri İmalatı, İş Makineleri İmalatı, Genel Konstrüksiyon Levhaları, Muhtelif Makine Parçası İmalatı, Kara ve Demiryolu Araçları İmalatı için

AlternativesThere is no alternative to this sheet.

Flat / Hot Rolled

Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.

İnşaat Makineleri İmalatı, İş Makineleri İmalatı, Genel Konstrüksiyon Levhaları, Muhtelif Makine Parçası İmalatı, Kara ve Demiryolu Araçları İmalatı için

Chemical Composition (%)

Standard Equivalent		Erdemir Grade No	Cmin.	Cmax.	Mnmin.	Mnmax.	Pmax.	Smax.	Simin.	Simax.	Nmax.	Crmax.	Momax.	Nimax.	Vmax.	Nbmax.	Timax.	Cumax.
Standard	Quality	Erdemir Grade No	Cmin.	Cmax.	Mnmin.	Mnmax.	Pmax.	Smax.	Simin.	Simax.	Nmax.	Crmax.	Momax.	Nimax.	Vmax.	Nbmax.	Timax.	Cumax.
SAE J403-2014	1022 (MOD)	3022	0.20	0.28	0.60	0.80	0.025	0.01	0.20	0.35	0.015	0.30	0.10	0.40	0.12	0.04	0.03	0.25

Grade specified on the table, is produced within the framework of agreements with customers.
%Al +0,5(%Ti)+0,5(%V)+0,25(%Nb) ≥ 0,020%
Mechanical test is not carried out.

Chemical Composition (%)

Standard Equivalent		Erdemir Grade No	Cmin.	Cmax.	Mnmin.	Mnmax.	Pmax.	Smax.	Simin.	Simax.	Nmax.	Crmax.	Momax.	Nimax.	Vmax.	Nbmax.	Timax.	Cumax.
Standard	Quality	Erdemir Grade No	Cmin.	Cmax.	Mnmin.	Mnmax.	Pmax.	Smax.	Simin.	Simax.	Nmax.	Crmax.	Momax.	Nimax.	Vmax.	Nbmax.	Timax.	Cumax.
KB02	C22	3022	0.20	0.28	0.60	0.80	0.025	0.01	0.20	0.35	0.015	0.30	0.10	0.40	0.12	0.04	0.03	0.25

Grade specified on the table, is produced within the framework of agreements with customers.
%Al +0,5(%Ti)+0,5(%V)+0,25(%Nb) ≥ 0,020%
Mechanical test is not carried out.