Türkçe
English
3901 جودة مواصفات الورقة
Hot rolled steels for wheel manufacturing based on customer specification
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled steels for wheel manufacturing based on customer specification
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Almax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||
| MW | MW01 | 3901 | 0.025 | 0.13 | 0.15 | 0.575 | 0.02 | 0.02 | 0.05 | 0.05 |
- Grade specified in this table is produced within the conditions in the table as suitable for chemical and mechanical properties which are mentioned according to only relevant standard specification.
الخواص الميكانيكية
| المعيار المكافئ | رقم جودة إرديمير | Re [N/mm2] | Rm [N/mm2] t(thickness, mm) | A(%) min. t(thickness, mm) | Impact | ||||
|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | ||||||||
| 2≤t≤3 | 3.01≤t≤6 | A802≤t≤3 | A53.01≤t≤6 | Temperature ( ° C) | KVC J min. | ||||
| MW | MW01 | 3901 | 240-340 | 360-470 | 340-470 | 26 | 28 | 20 | 27 |
- The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
- Tensile test values apply to "transverse" test pieces