810 جودةمواصفات الورقة

810 جودة مواصفات الورقة

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

رموز الحروف القابلة لإعادة الإنتاج --> HRP --> HRPKK --> HRU --> HRUKK --> KRKK --> LP --> LPKK --> LR --> LRKK --> RD --> RKK --> RP --> RPD --> RPKK
البدائل800 811 820 4932 4936 4942 4946 4950

Flat / Hot Rolled

Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

التركيب الكيميائي (%)

المعيار المكافئرقم جودة إرديميرCmax.Mnmax.Pmax.Smax.Simax.Almin.Almax.Vmax.Nbmax.Timax.Cumax.
المعيارجودة
EN 10149-2:2013S355MC8100.111.400.0240.0250.030.0150.080.100.100.100.25
  1. Grade specified on the table, is produced within the framework of agreements with customers.

الخواص الميكانيكية

المعيار المكافئرقم جودة إرديميرRe [N/mm2]Rm [N/mm2]A(%) min. t(thickness, mm)ImpactBend (Transverse , BMD) t: thicknessn90
المعيارجودة
A801.5≤t≤2.99A53≤t≤20Temperature ( ° C)6≤t≤7.49KVC J min.6≤t≤7.49Temperature ( ° C)7.5≤t≤9.99KVC J min.7.5≤t≤9.99Temperature ( ° C)10≤t≤25KVC J min.10≤t≤25180°min.
EN 10149-2:2013S355MC810360-440445-5202327-2020-2030-2040Ø 0,50.13
  1. Tensile test values apply to "longitudinal" test pieces
  2. Re/Rm ≤ 0.88
  3. The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
  4. The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
  5. The bending test is carried out only when specified at the time of enquiry and order.

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

التركيب الكيميائي (%)

المعيار المكافئرقم جودة إرديميرCmax.Mnmax.Pmax.Smax.Simax.Almin.Almax.Vmax.Nbmax.Timax.Cumax.
المعيارجودة
11-04-002HE-360 DR8100.111.400.0240.0250.030.0150.080.100.100.100.25
  1. Grade specified on the table, is produced within the framework of agreements with customers.

الخواص الميكانيكية

المعيار المكافئرقم جودة إرديميرRe [N/mm2]Rm [N/mm2]A(%) min. t(thickness, mm)ImpactBend (Transverse , BMD) t: thicknessn90
المعيارجودة
A801.5≤t≤2.99A53≤t≤20Temperature ( ° C)6≤t≤7.49KVC J min.6≤t≤7.49Temperature ( ° C)7.5≤t≤9.99KVC J min.7.5≤t≤9.99Temperature ( ° C)10≤t≤25KVC J min.10≤t≤25180°min.
11-04-002HE-360 DR810360-440445-5202327-2020-2030-2040Ø 0,50.13
  1. Tensile test values apply to "longitudinal" test pieces
  2. Re/Rm ≤ 0.88
  3. The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
  4. The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
  5. The bending test is carried out only when specified at the time of enquiry and order.

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

التركيب الكيميائي (%)

المعيار المكافئرقم جودة إرديميرCmax.Mnmax.Pmax.Smax.Simax.Almin.Almax.Vmax.Nbmax.Timax.Cumax.
المعيارجودة
11-04-002HE-360 D8100.111.400.0240.0250.030.0150.080.100.100.100.25
  1. Grade specified on the table, is produced within the framework of agreements with customers.

الخواص الميكانيكية

المعيار المكافئرقم جودة إرديميرRe [N/mm2]Rm [N/mm2]A(%) min. t(thickness, mm)ImpactBend (Transverse , BMD) t: thicknessn90
المعيارجودة
A801.5≤t≤2.99A53≤t≤20Temperature ( ° C)6≤t≤7.49KVC J min.6≤t≤7.49Temperature ( ° C)7.5≤t≤9.99KVC J min.7.5≤t≤9.99Temperature ( ° C)10≤t≤25KVC J min.10≤t≤25180°min.
11-04-002HE-360 D810360-440445-5202327-2020-2030-2040Ø 0,50.13
  1. Tensile test values apply to "longitudinal" test pieces
  2. Re/Rm ≤ 0.88
  3. The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
  4. The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
  5. The bending test is carried out only when specified at the time of enquiry and order.