6036 جودةمواصفات الورقة

6036 جودة مواصفات الورقة

Katlamaya Uygun Yapı Çelikleri

رموز الحروف القابلة لإعادة الإنتاج --> HRP --> HRPKK --> HRU --> HRUKK --> KRKK --> L --> LKK --> LP --> LPKK --> LR --> LRKK --> R --> RD --> RKK --> RKKM --> RP --> RPD --> RPKK --> TR --> TRKK
البدائل3018 3237 4237 3244 6040 6237

Flat / Hot Rolled

Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.

Katlamaya Uygun Yapı Çelikleri

التركيب الكيميائي (%)

المعيار المكافئرقم جودة إرديميرالسماكة (مم)Cmax.Mnmin.Mnmax.Pmax.Smax.Nmax.Crmax.Momax.Nimax.Vmax.Nbmax.Timax.Cumax.
المعيارجودة
ASTM A1018-2025SS 36 Type 260361≤t≤200.25--0.0350.04140.000.150.060.200.0080.0080.0250.20
ASTM A1018-2025SS 36 Type 2603620.01≤t≤250.250.801.200.0350.04140.000.150.060.200.0080.0080.0250.20
  1. Titanium is permitted at the producer’s option, to the lesser of 3.4N + 1.5S or 0.025 %.
  2. When copper is requested in the chemical compositon, value specified in the table will be evaluated as minimum value. When copper is not specified, the copper limit is a maximum requirement.
  3. Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.

الخواص الميكانيكية

المعيار المكافئرقم جودة إرديميرRe [N/mm2]Rm [N/mm2]
المعيارجودة
ASTM A1018-2025SS 36 Type 26036250 min.400-550
  1. Tensile test values apply to "transverse" test pieces
  2. The bending test and impact test are carried out only when specified at the time of enquiry and order.

Flat / Plate

Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.

Katlamaya Uygun Yapı Çelikleri

التركيب الكيميائي (%)

المعيار المكافئرقم جودة إرديميرالسماكة (مم)Cmax.Mnmin.Mnmax.Pmax.Smax.Nmax.Crmax.Momax.Nimax.Vmax.Nbmax.Timax.Cumax.
المعيارجودة
ASTM A1018-2025SS 36 Type 260366≤t≤200.25--0.0350.04140.000.150.060.200.0080.0080.0250.20
ASTM A1018-2025SS 36 Type 2603620.01≤t≤1000.250.801.200.0350.04140.000.150.060.200.0080.0080.0250.20
  1. Titanium is permitted at the producer’s option, to the lesser of 3.4N + 1.5S or 0.025 %.
  2. When copper is requested in the chemical compositon, value specified in the table will be evaluated as minimum value. When copper is not specified, the copper limit is a maximum requirement.
  3. Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.

الخواص الميكانيكية

المعيار المكافئرقم جودة إرديميرRe [N/mm2]Rm [N/mm2]
المعيارجودة
ASTM A1018-2025SS 36 Type 26036250 min.400-550
  1. Tensile test values apply to "transverse" test pieces
  2. The bending test and impact test are carried out only when specified at the time of enquiry and order.