Türkçe
English
6404 جودة مواصفات الورقة
Low-carbon unalloyed mild steels for cold reducing with the obligation of batch annealing
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Low-carbon unalloyed mild steels for cold reducing with the obligation of batch annealing
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Almax. | Nmax. | Crmax. | Momax. | Nimax. | Vmax. | Nbmax. | Timax. | Cumax. | Bmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||||||||||
| SAE J403-2014 | 1006 (MOD3) | 6404 | 0.06 | 0.30 | 0.02 | 0.018 | 0.03 | 0.015 | 0.08 | 120.00 | 0.06 | 0.02 | 0.08 | 0.01 | 0.005 | 0.01 | 0.08 | 10.00 |
- Cu + Ni + Cr ≤ 0.18 %
- Mechanical test is not carried out.
- Suitable for batch annealing after cold reducing.