Türkçe
English
6340 جودة مواصفات الورقة
Hot rolled intermediate strength steel suitable for usage under low pressure and temperature
البدائللا يوجد بديل لهذه الورقة.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled intermediate strength steel suitable for usage under low pressure and temperature
التركيب الكيميائي (%)
| المعيار المكافئ | رقم جودة إرديمير | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | |
|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | ||||||||
| EN 10207:2005 | P275SL | 6340 | 0.16 | 0.50 | 1.50 | 0.025 | 0.02 | 0.40 | 0.02 |
- Minimum value for aluminium does not apply if the chemical composition includes additionally Nb, Ti or V.
الخواص الميكانيكية
| المعيار المكافئ | رقم جودة إرديمير | Re [N/mm2] t(thickness, mm) | Rm [N/mm2] | A(%) min. t(thickness, mm) | Impact | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| المعيار | جودة | |||||||||||||
| 1.8≤t≤16 | 16.01≤t≤25 | A801.8≤t≤2.5 | A802.51≤t≤2.99 | A53≤t≤25 | Temperature ( ° C)6≤t≤7.49 | KVC J min.6≤t≤7.49 | Temperature ( ° C)7.5≤t≤9.99 | KVC J min.7.5≤t≤9.99 | Temperature ( ° C)10≤t≤25 | KVC J min.10≤t≤25 | ||||
| EN 10207:2005 | P275SL | 6340 | 275 min. | 265 min. | 390-510 | 17 | 18 | 22 | -50 | 14 | -50 | 21 | -50 | 28 |
- Tensile test values apply to "transverse" test pieces
- The tensile test for proof strength at elevated temperature is carried out on request.
- Impact test is not carried out for thickness thinner than 6 mm.