Türkçe
العربية
1832 Quality Sheet Specification
Hot rolled steels suitable for production of hot-dip galvanised structural steels provided that continuously annealed after cold reducing
Reproducible Letter Symbols --> BCKK --> HCKK --> TCK
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled steels suitable for production of hot-dip galvanised structural steels provided that continuously annealed after cold reducing
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Nmax. | Vmax. | Nbmax. | Timax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||
| Erdemir-2004 | 1832 | 1832 | 0.20 | 1.50 | 0.025 | 0.025 | 0.04 | 120.00 | 0.10 | 0.008 | 0.04 |
- Mechanical test is not carried out.