Türkçe
العربية
7116 Quality Sheet Specification
Non-aging extra deep-drawing quality steels (Ultra low carbon IF steels)
AlternativesThere is no alternative to this sheet.
Flat / Cold Rolled
Cold rolled coils or flat steel products are produced by rolling hot rolled flat steels without a heat treatment operation in a thickness range of 0.20 to 2.00mm. While the product’s physical properties are all homogeneous along the strip, surface flatness, width and thickness values have fulfilled expectations at the top level.
Non-aging extra deep-drawing quality steels (Ultra low carbon IF steels)
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Timax. | |
|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||
| EN 10130:2006 | DC06 | 7116 | 0.02 | 0.25 | 0.02 | 0.02 | 0.30 |
- Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.
- The limits which are specified in the table are the limits of the customer's specifications.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] t(thickness, mm) | Rm [N/mm2] | A(%) min. t(thickness, mm) | n90 | r90 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||
| 0.5≤t≤0.5 | 0.51≤t≤0.7 | 0.71≤t≤2 | A800.5≤t≤0.5 | A800.51≤t≤0.7 | A800.71≤t≤2 | min. | |||||
| EN 10130:2006 | DC06 | 7116 | 210 max. | 190 max. | 170 max. | 270-330 | 37 | 39 | 41 | 0.22 | 2.1 min. |
- Tensile test values apply to "transverse" test pieces
- The value of r90 only apply to products of thickness d ≥ 0.5 mm.
- The value of n90 only apply to products of thickness d ≥ 0.5 mm.
- For design purposes, the lower limit of Re may be assumed to be 120 N/mm² (12.2 kg/mm²)
- There is no guarantee period limit for absence of stretcher strains marks. Guarantee periods of mechanical properties are 6 months.