Türkçe
العربية
256 Quality Sheet Specification
Soğuk şekillendirmeye uygun yüksek mukavemetli çelikler
AlternativesThere is no alternative to this sheet.
Flat / Cold Rolled
Cold rolled coils or flat steel products are produced by rolling hot rolled flat steels without a heat treatment operation in a thickness range of 0.20 to 2.00mm. While the product’s physical properties are all homogeneous along the strip, surface flatness, width and thickness values have fulfilled expectations at the top level.
Soğuk şekillendirmeye uygun yüksek mukavemetli çelikler
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Nbmax. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||
| WSS-M1A367 | A37 | 256 | 0.12 | 1.60 | 0.03 | 0.025 | 0.50 | 0.015 | 0.09 | 0.15 | 0.20 |
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. | n10-UE | |
|---|---|---|---|---|---|---|
| Standard | Quality | |||||
| A80 | min. | |||||
| WSS-M1A367 | A37 | 256 | 380-460 | 450-570 | 18 | 0.11 |
- Tensile test values apply to "longitudinal" test pieces
- Unless otherwise agreed, n value is taken between %10-20 elongation range.