Türkçe
العربية
262 Quality Sheet Specification
High strength steels for cold forming
AlternativesThere is no alternative to this sheet.
Flat / Cold Rolled
Cold rolled coils or flat steel products are produced by rolling hot rolled flat steels without a heat treatment operation in a thickness range of 0.20 to 2.00mm. While the product’s physical properties are all homogeneous along the strip, surface flatness, width and thickness values have fulfilled expectations at the top level.
High strength steels for cold forming
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almax. | Nbmax. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||
| EN 10268:2006+A1:2013 | HC460LA (MOD) | 262 | 0.12 | 1.50 | 0.02 | 0.02 | 0.50 | 0.015 | 0.09 | 0.15 | 0.10 |
- (Nb + V + Ti) ≤ 0.22%
- C, Mn, P, S, Si and Cu limits which are specified in the table is the limit of the customer's specifications. The other limits are specified as reference value according to Erdemir manufacturing practice.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. | |
|---|---|---|---|---|---|
| Standard | Quality | ||||
| A80 | |||||
| EN 10268:2006+A1:2013 | HC460LA (MOD) | 262 | 460-580 | 529-680 | 16 |
- The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
- Tensile test values apply to "longitudinal" test pieces