Türkçe
العربية
3032 Quality Sheet Specification
Hot Rolled Carbon Steel For Strap Production After Cold Rolling And Heat Treatment
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot Rolled Carbon Steel For Strap Production After Cold Rolling And Heat Treatment
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | Nmax. | Nbmin. | Nbmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||||
| EN 10083-2:2006 | 28Mn6 (MOD) | 3032 | 0.28 | 0.32 | 1.50 | 1.65 | 0.03 | 0.035 | 0.25 | 0.40 | 100.00 | 0.015 | 0.03 |
- Specified limit values are determined within the framework of agreements with customers.
- Mechanical test is not carried out.
- Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.
- This grade will be produced in İsdemir facilities.