Türkçe
العربية
7222 Quality Sheet Specification
Hot rolled steels for cold forming
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled steels for cold forming
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | |
|---|---|---|---|---|---|---|
| Standard | Quality | |||||
| EN 10111:2008 | DD11 | 7222 | 0.12 | 0.60 | 0.045 | 0.045 |
- There are no chemical footnotes.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] t(thickness, mm) | Rm [N/mm2] | A(%) min. t(thickness, mm) | ||||
|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||
| 1.5≤t≤1.99 | 2≤t≤11 | A801.5≤t≤1.99 | A802≤t≤2.99 | A53≤t≤11 | ||||
| EN 10111:2008 | DD11 | 7222 | 170-360 | 170-340 | 440 max. | 23 | 24 | 28 |
- Tensile test values apply to "transverse" test pieces
- Recommended for use within 6 weeks from the date which products are made available.