Türkçe
العربية
7535 Quality Sheet Specification
Hot rolled low-carbon steels for vitreous enamelling
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled low-carbon steels for vitreous enamelling
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Almin. | Timax. | |
|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||
| ERDEMİR-2023 | 7535 | 7535 | 0.0035 | 0.30 | 0.03 | 0.02 | 0.015 | 0.10 |
- Specified limit values are determined within the framework of agreements with customers.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. | |
|---|---|---|---|---|---|
| Standard | Quality | ||||
| A80 | |||||
| ERDEMİR-2023 | 7535 | 7535 | 240 max. | 360 max. | 35 |
- This grade is produced according to reference mechanical values above in line with agreements with customers.