Türkçe
العربية
6114 Quality Sheet Specification
General application steels for drawing (automotive, refrigerators, washing machines, home appliances, etc)
Flat / Cold Rolled
Cold rolled coils or flat steel products are produced by rolling hot rolled flat steels without a heat treatment operation in a thickness range of 0.20 to 2.00mm. While the product’s physical properties are all homogeneous along the strip, surface flatness, width and thickness values have fulfilled expectations at the top level.
General application steels for drawing (automotive, refrigerators, washing machines, home appliances, etc)
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | |
|---|---|---|---|---|---|---|
| Standard | Quality | |||||
| EN 10130:2006 | DC04 | 6114 | 0.08 | 0.40 | 0.03 | 0.03 |
- Deoxidation method of this products is fully-killed. Minimum aluminium to nitrogen ratio is 2:1.
- The limits which are specified in the table are the limits of the customer's specifications.
- Can be produced with titanium added.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] t(thickness, mm) | Rm [N/mm2] | A(%) min. t(thickness, mm) | n90 | r90 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||
| 0.2≤t≤0.5 | 0.51≤t≤0.7 | 0.71≤t≤2 | A800.2≤t≤0.5 | A800.51≤t≤0.7 | A800.71≤t≤2 | min. | |||||
| EN 10130:2006 | DC04 | 6114 | 250 max. | 230 max. | 210 max. | 270-350 | 34 | 36 | 38 | 0.18 | 1.6 min. |
- Tensile test values apply to "transverse" test pieces
- The value of r90 only apply to products of thickness d ≥ 0.5 mm.
- The value of n90 only apply to products of thickness d ≥ 0.5 mm.
- For design purposes, the lower limit of Re may be assumed to be 140 N/mm² (14,3 kg/mm²)
- The grade is produced by "Batch-Annealing" as A surface.
- Guarantee periods of absence of stretcher strains marks and mechanical properties are 6 months. The period begin on the date on which products are made available.