800 QualitySheet Specification

800 Quality Sheet Specification

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

Reproducible Letter Symbols --> HRP --> HRPKK --> HRU --> HRUKK --> KRKK --> LP --> LPKK --> LR --> LRKK --> RD --> RKK --> RP --> RPD --> RPKK

Alternatives810 811 820 4932 4936 4942 4946 4950

Flat / Hot Rolled

Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

Chemical Composition (%)

Standard Equivalent		Erdemir Grade No	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Almax.	Vmax.	Nbmax.	Timax.	Cumax.
Standard	Quality	Erdemir Grade No	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Almax.	Vmax.	Nbmax.	Timax.	Cumax.
EN 10149-2:2013	S315MC	800	0.10	1.10	0.024	0.025	0.03	0.015	0.08	0.10	0.10	0.10	0.25

Grade specified on the table, is produced within the framework of agreements with customers.

Mechanical Properties

Standard Equivalent		Erdemir Grade No	Re [N/mm2]	Rm [N/mm2]	A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness	n90
Standard	Quality				A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness	n90
Standard	Quality				A801.5≤t≤2.99	A53≤t≤25	Temperature ( ° C)6≤t≤7.49	KVC J min.6≤t≤7.49	Temperature ( ° C)7.5≤t≤9.99	KVC J min.7.5≤t≤9.99	Temperature ( ° C)10≤t≤25	KVC J min.10≤t≤25	180°	min.
EN 10149-2:2013	S315MC	800	320-390	410-480	24	28	-20	20	-20	30	-20	40	Ø 0	0.14

Re/Rm ≤ 0.88
The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
The bending test is carried out only when specified at the time of enquiry and order.
Tensile test values apply to "longitudinal" test pieces

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

Chemical Composition (%)

Standard Equivalent		Erdemir Grade No	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Almax.	Vmax.	Nbmax.	Timax.	Cumax.
Standard	Quality	Erdemir Grade No	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Almax.	Vmax.	Nbmax.	Timax.	Cumax.
11-04-002	HE-320 D	800	0.10	1.10	0.024	0.025	0.03	0.015	0.08	0.10	0.10	0.10	0.25

Grade specified on the table, is produced within the framework of agreements with customers.

Mechanical Properties

Standard Equivalent		Erdemir Grade No	Re [N/mm2]	Rm [N/mm2]	A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness	n90
Standard	Quality				A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness	n90
Standard	Quality				A801.5≤t≤2.99	A53≤t≤25	Temperature ( ° C)6≤t≤7.49	KVC J min.6≤t≤7.49	Temperature ( ° C)7.5≤t≤9.99	KVC J min.7.5≤t≤9.99	Temperature ( ° C)10≤t≤25	KVC J min.10≤t≤25	180°	min.
11-04-002	HE-320 D	800	320-390	410-480	24	28	-20	20	-20	30	-20	40	Ø 0	0.14

Re/Rm ≤ 0.88
The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
The bending test is carried out only when specified at the time of enquiry and order.
Tensile test values apply to "longitudinal" test pieces

Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings in particular

Chemical Composition (%)

Standard Equivalent		Erdemir Grade No	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Almax.	Vmax.	Nbmax.	Timax.	Cumax.
Standard	Quality	Erdemir Grade No	Cmax.	Mnmax.	Pmax.	Smax.	Simax.	Almin.	Almax.	Vmax.	Nbmax.	Timax.	Cumax.
11-04-002	HE-320 DR	800	0.10	1.10	0.024	0.025	0.03	0.015	0.08	0.10	0.10	0.10	0.25

Grade specified on the table, is produced within the framework of agreements with customers.

Mechanical Properties

Standard Equivalent		Erdemir Grade No	Re [N/mm2]	Rm [N/mm2]	A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness	n90
Standard	Quality				A(%) min. t(thickness, mm)		Impact						Bend (Transverse , BMD) t: thickness	n90
Standard	Quality				A801.5≤t≤2.99	A53≤t≤25	Temperature ( ° C)6≤t≤7.49	KVC J min.6≤t≤7.49	Temperature ( ° C)7.5≤t≤9.99	KVC J min.7.5≤t≤9.99	Temperature ( ° C)10≤t≤25	KVC J min.10≤t≤25	180°	min.
11-04-002	HE-320 DR	800	320-390	410-480	24	28	-20	20	-20	30	-20	40	Ø 0	0.14

Re/Rm ≤ 0.88
The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
The bending test is carried out only when specified at the time of enquiry and order.
Tensile test values apply to "longitudinal" test pieces