Türkçe
العربية
813 Quality Sheet Specification
Soğuk Şekillendirme İşlemlerine Uygun Orta ve Yüksek Mukavemetli Düşük Alaşımlı, Özellikle Şasi, Güvenlik Bariyeri, Römork, Vinç Yapımında Kullanılan Çelikler
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Soğuk Şekillendirme İşlemlerine Uygun Orta ve Yüksek Mukavemetli Düşük Alaşımlı, Özellikle Şasi, Güvenlik Bariyeri, Römork, Vinç Yapımında Kullanılan Çelikler
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Nbmin. | Nbmax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||
| 52812 | FEE 340 | 813 | 0.12 | 1.50 | 0.03 | 0.03 | 0.50 | 0.015 | 0.015 | 0.04 |
- (Nb + V + Ti) ≤ 0.20%
- Grade specified on the table, is produced within the framework of agreements with customers.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. t(thickness, mm) | Bend (Transverse , BMD) t: thickness | ||
|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||
| A802≤t≤2.99 | A53≤t≤22 | 180° | |||||
| 52812 | FEE 340 | 813 | 340-420 | 410 min. | 23 | 23 | Ø 0,5 |
- Tensile test values apply to "longitudinal" test pieces
- The bending test is carried out only when specified at the time of enquiry and order.