Türkçe
العربية
319 Quality Sheet Specification
Zinc coated (galvanized) low carbon steels for cold forming
AlternativesThere is no alternative to this sheet.
Flat / Galvanised
Galvanized flat steel is manufactured by zinc-coating both sides of cold rolled metal by hot-dipping process. After having coated the steel surface with zinc, the coating of the interface is transformed into an alloy of iron-zinc layer through heating by induction and the galvannealed steel is produced.
Zinc coated (galvanized) low carbon steels for cold forming
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||
| WSS-M1A365 | A12 | 319 | 0.10 | 0.50 | 0.025 | 0.02 | 0.50 | 0.01 | 0.30 | 0.20 |
- The limits which are specified in the table are the limits of the customer's specifications.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. | n90 | r90 | |
|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||
| A80 | min. | ||||||
| WSS-M1A365 | A12 | 319 | 140-240 | 270-370 | 34 | 0.16 | 1.3 min. |
- Transverse and longitudinal test values are the same. Tensile tests are carried out only in the transverse direction and specified in the certificate. And also longitudinal test values are guaranteed.
- The value of r90 only apply to products of thickness d ≥ 0.5 mm.
- The value of n90 only apply to products of thickness d ≥ 0.5 mm.