Türkçe
العربية
320 Quality Sheet Specification
Zinc coated (galvanized) low carbon steels for cold forming
AlternativesThere is no alternative to this sheet.
Flat / Galvanised
Galvanized flat steel is manufactured by zinc-coating both sides of cold rolled metal by hot-dipping process. After having coated the steel surface with zinc, the coating of the interface is transformed into an alloy of iron-zinc layer through heating by induction and the galvannealed steel is produced.
Zinc coated (galvanized) low carbon steels for cold forming
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Nbmax. | Timax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||
| WSS-M1A365 | A13 | 320 | 0.01 | 0.30 | 0.025 | 0.02 | 0.03 | 0.08 | 0.035 | 0.09 |
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. | n90 | r90 | rort | |
|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||
| A80 | min. | |||||||
| WSS-M1A365 | A13 | 320 | 140-210 | 270-350 | 38 | 0.18 | 1.6 min. | 1.6 min. |
- Transverse and longitudinal test values are the same. Tensile tests are carried out only in the transverse direction and specified in the certificate. And also longitudinal test values are guaranteed.
- The mechanical properties are valid for a period of 6 months from the date on which the products are made available.
- Average Plastic Strain Ratio (ravg) is calculated as a weighted average of the individual r-values, i.e., ( r0+r90+2r45) / 4