Türkçe
العربية
3737 Quality Sheet Specification
Gemi Yapımına uygun yüksek ve mukavemetli çelikler
AlternativesThere is no alternative to this sheet.
Flat / Plate
Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.
Gemi Yapımına uygun yüksek ve mukavemetli çelikler
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Crmax. | Momax. | Nimax. | Vmin. | Vmax. | Nbmin. | Nbmax. | Timax. | Camax. | Cumax. | Ceq+C+Buyuk+012max. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||||||||||||
| ABS-P2 | AH36 ÖZEL | 3737 | 0.18 | 0.90 | 1.60 | 0.035 | 0.035 | 0.50 | 0.02 | 0.20 | 0.08 | 0.40 | 0.05 | 0.10 | 0.02 | 0.05 | 0.02 | 0.005 | 0.35 | 0.41 |
- When Al and V are used together, V should be minimum 0.030% and Al(tot) should be minimum 0.015%.
- When Al and Nb are used together, Nb should be minimum 0.010% and Al(tot) should be minimum 0.015%.
- The indicated amount of aluminum, niobium and vanadium applies when any such element is used singly.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. t(thickness, mm) | Impact | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||||||
| A2006≤t≤10 | A20010≤t≤15 | A20015≤t≤20 | A20020≤t≤25 | A20025≤t≤30 | A20030≤t≤40 | A20040≤t≤50 | Temperature ( ° C)8≤t≤50 | KVC J min.8≤t≤50 | Temperature ( ° C)50≤t≤60 | KVC J min.50≤t≤60 | |||||
| ABS-P2 | AH36 ÖZEL | 3737 | 355 min. | 490-620 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 0 | 34 | 0 | 41 |