Türkçe
العربية
5345 Quality Sheet Specification
Alaşımlı Yapı Çeliği
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Alaşımlı Yapı Çeliği
Flat / Plate
Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.
Alaşımlı Yapı Çeliği
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||
| ASTM A829-2025 | 1345 | 5345 | 0.43 | 0.48 | 1.60 | 1.90 | 0.03 | 0.04 | 0.15 | 0.35 |
- Corresponds to "SAE J404-95 Gr. 1345" grade
- Mechanical test is not carried out.