Türkçe
العربية
5375 Quality Sheet Specification
Tool steel
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Tool steel
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | Crmin. | Crmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||||
| DIN 17350:1980 | 75Cr1 | 5375 | 0.70 | 0.80 | 0.60 | 0.80 | 0.03 | 0.03 | 0.25 | 0.50 | 0.30 | 0.40 |
- Mechanical test is not carried out.
Flat / Plate
Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.
Tool steel
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simin. | Simax. | Crmin. | Crmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||||
| DIN 17350:1980 | 75Cr1 | 5375 | 0.70 | 0.80 | 0.60 | 0.80 | 0.03 | 0.03 | 0.25 | 0.50 | 0.30 | 0.40 |
- Mechanical test is not carried out.