Türkçe
العربية
5622 Quality Sheet Specification
Hot rolled boron alloyed steels for manufacturing of agricultural equipment by quenching and tempering
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled boron alloyed steels for manufacturing of agricultural equipment by quenching and tempering
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Crmin. | Crmax. | Timin. | Timax. | Camin. | Camax. | Bmin. | Bmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||||||||
| ERDEMİR-2015 | 22MnB5 | 5622 | 0.19 | 0.25 | 1.10 | 1.40 | 0.025 | 0.015 | 0.40 | 0.10 | 0.30 | 0.015 | 0.06 | 0.002 | 0.006 | 8.00 | 50.00 |
- Grade specified on the table, is produced within the framework of agreements with customers.
- Mechanical test is not carried out.
Flat / Plate
Heavy plate products are obtained by rolling semi-finished products with a rectangular cross-section (slab) produced by the continuous casting method to a specific temperature, with thicknesses ranging from 6.00 to 200.00 mm and widths ranging from 1000 to 3600 mm.
Hot rolled boron alloyed steels for manufacturing of agricultural equipment by quenching and tempering
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmin. | Cmax. | Mnmin. | Mnmax. | Pmax. | Smax. | Simax. | Crmin. | Crmax. | Timin. | Timax. | Camin. | Camax. | Bmin. | Bmax. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||||||||||||
| ERDEMİR-2015 | 22MnB5 | 5622 | 0.19 | 0.25 | 1.10 | 1.40 | 0.025 | 0.015 | 0.40 | 0.10 | 0.30 | 0.015 | 0.06 | 0.002 | 0.006 | 8.00 | 50.00 |
- Grade specified on the table, is produced within the framework of agreements with customers.
- Mechanical test is not carried out.