Türkçe
العربية
6523 Quality Sheet Specification
Hot rolled low-carbon steels for vitreous enamelling after cold reducing
Reproducible Letter Symbols --> BCKK --> HCKK --> HRP --> HRPKK --> HRU --> HRUKK --> KRKK --> L --> LKK --> LP --> LPKK --> LR --> LRKK --> R --> RD --> RKK --> RP --> RPD --> RPKK --> TCKK --> THRU --> TR --> TRK
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled low-carbon steels for vitreous enamelling after cold reducing
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Bmin. | Bmax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||
| ERDEMİR-2001 | 6523 | 6523 | 0.05 | 0.30 | 0.015 | 0.015 | 0.04 | 0.02 | 10.00 | 60.00 |
- Cu + Ni + Cr + Mo ≤ 0.18 %
- For Fully Killed grades, if Al(tot) value is lower than 0.020%, Al/N shall not be lower than 2/1.
- Mechanical test is not carried out.
- Suitable for enamelling after batch annealing.