Türkçe
العربية
705 Quality Sheet Specification
Soğuk Şekillendirme ve Derin Çekme İşlemlerine Uygun Çelik
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Soğuk Şekillendirme ve Derin Çekme İşlemlerine Uygun Çelik
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | Simax. | Almin. | Timax. | Cumax. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Quality | |||||||||
| WSS-M1A365 | A20-HR0 | 705 | 0.13 | 0.60 | 0.035 | 0.03 | 0.50 | 0.015 | 0.30 | 0.20 |
- Grade specified on the table, is produced within the framework of agreements with customers.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. t(thickness, mm) | n10-UE | ||
|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||
| A801.5≤t≤2.99 | A53≤t≤7.99 | min. | |||||
| WSS-M1A365 | A20-HR0 | 705 | 240-350 | 310-460 | 22 | 26 | 0.12 |
- Tensile test values apply to "transverse" test pieces