Türkçe
العربية
714 Quality Sheet Specification
Hot rolled high yield strength steels suitable for cold forming
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
Hot rolled high yield strength steels suitable for cold forming
Chemical Composition (%)
| Standard Equivalent | Erdemir Grade No | Cmax. | Mnmax. | Pmax. | Smax. | |
|---|---|---|---|---|---|---|
| Standard | Quality | |||||
| FG52806 | FEP13 | 714 | 0.08 | 0.40 | 0.03 | 0.03 |
- Chemical composition is based on DD13 grade stated in EN 10111 as referred by customer.
Mechanical Properties
| Standard Equivalent | Erdemir Grade No | Re [N/mm2] | Rm [N/mm2] | A(%) min. t(thickness, mm) | n90 | ||
|---|---|---|---|---|---|---|---|
| Standard | Quality | ||||||
| A802≤t≤2.99 | A53≤t≤8 | min. | |||||
| FG52806 | FEP13 | 714 | 170-310 | 270-410 | 33 | 35 | 0.18 |
- Tensile test values apply to "transverse" test pieces
- The mechanical properties are valid for a period of 6 months from the date on which the products are made available.