735 Quality Sheet Specification
High-strength structural steels for manufacture of any kind of machines and machine parts, general construction, road and railway vehicles
AlternativesThere is no alternative to this sheet.
Flat / Hot Rolled
Flat steel products are obtained by heating semi-finished products with a rectangular cross-section (slab), which are produced by the continuous casting method, to a specific temperature and then rolling them, with thicknesses ranging from 1.40 to 25.40 mm and widths ranging from 700 to 2025 mm, produceed as coil or by cutting/slit-coiling flat steel products from coils.
High-strength structural steels for manufacture of any kind of machines and machine parts, general construction, road and railway vehicles
- Grade specified on the table, is produced within the framework of agreements with customers.
- The limitation requests for the residual elements (Cu, Ni, Cr, Mo) which are not mentioned on the table are subjected to negotitation for special application purposes.
- Tensile test values apply to "transverse" test pieces
- The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
- The bending test is carried out only when specified at the time of enquiry and order.
High-strength structural steels for manufacture of any kind of machines and machine parts, general construction, road and railway vehicles
- Grade specified on the table, is produced within the framework of agreements with customers.
- The limitation requests for the residual elements (Cu, Ni, Cr, Mo) which are not mentioned on the table are subjected to negotitation for special application purposes.
- Tensile test values apply to "transverse" test pieces
- The impact test is carried out only when specified at the time of enquiry and order and is not carried out for thickness thinner than 6 mm.
- The bending test is carried out only when specified at the time of enquiry and order.
Türkçe
العربية